|
||||||||||||
 | Hovering will show thumbnail Pop-Up Clicking will show section. |
| Hovering will show thumbnail Pop-Up Clicking will show section. |
|
Pricing applies to Internet orders only!!! Numbers shown are quantities used per assembly. Prices are based on a quantity of one (Each). Order the quantities needed for repair. |
| ORDER QTY |
REF. NO. |
PART NO. / DESCRIPTION | SALE PRICE |
X2 REQ |
| 11009 | 11009-3729 GASKET, CHOKE VALVE |
10.69 | 1 | |
| 11009A | 11009-3730 GASKET, DIAPHRAGM |
14.37 | 1 | |
| 13183 | 13183-3707 PLATE |
12.14 | 1 | |
| 14024 | 14024-3720 COVER, CARBURETOR |
40.85 | 1 | |
| 15001 | 15001-3720 CARBURETOR, ASSY. |
591.63 | 1 | |
| 16009 | 16009-3701 NEEDLE, JET, HIGH SPEED |
23.86 | 1 | |
| 16009A | 16009-3702 NEEDLE, JET, LOW SPEED |
34.76 | 1 | |
| 16021 | 16021-3702 SCREW, THROTTLE STOP |
44.76 | 1 | |
| 16030 | 16030-3701 VALVE, FLOAT |
47.20 | 1 | |
| 16055 | 16055-3701 ARM, FLOAT |
44.53 | 1 | |
| 16087 | 16087-3702 VALVE, CHECK |
10.09 | 1 | |
| 16158 | 16158-3701 JET, SLOW, #48 |
13.17 | 1 | |
| 32099 | 32099-3712 CASE, CARBURETOR |
108.40 | 1 | |
| 43028 | 43028-3704 DIAPHRAGM, CARBURETOR |
89.29 | 1 | |
| 92009 | 223B0306 SCREW, PAN, WS, CROS, 3X6 |
3.78 | 2 | |
| 92009A | 92009-3711 SCREW, 4X16 |
6.48 | 4 | |
| 92009B | 92009-3712 SCREW, 3X6 |
2.22 | 1 | |
| 92022 | 92022-3734 WASHER, ADJUST SCREW |
4.19 | 4 | |
| 92043 | 92043-1209 PIN, FLOAT |
5.74 | 1 | |
| 92043A | 92043-3712 PIN, THROTTLE STOP SCREW |
4.52 | 1 | |
| 92055 | 92055-1223 O-RING, FUEL FITTING |
5.14 | 1 | |
| 92055A | 92055-3713 O-RING, ADJUST SCREW |
4.87 | 2 | |
| 92055B | 92055-3714 O-RING |
13.17 | 1 | |
| 92063 | 92063-1069 MAIN JET, 2ND, #125 |
13.85 | 1 | |
| 92144 | 92144-3704 SPRING, ADJUST SCREW |
6.48 | 2 | |
| 92144A | 92144-3705 SPRING, FLOAT VALVE |
6.56 | 1 | |
| 92144B | 92144-3706 SPRING, THROTTLE STOP |
7.05 | 1 | |
| 220 | 220D0408 SCREW, PAN, CROS |
0.67 | 1 |
| Powered by HLSM |
| Copyright © 2024 HLSM, Inc. All rights reserved. This material may not be published, broadcast, rewritten, or redistributed. For further information, contact HLSM, Inc. Version: 03.11.2023 |
